DRAMIX - Стальные армирующие волокна

Dramix® are fibres produced by cold-drawing prime quality steel to ensure high tensile strength and minimum dimensional tolerances.‎ They are used to reinforce concrete, giving it greater ductility, high load-bearing strength, effective crack control and durability.‎ Dramix® fibres are the only ones to offer the right balance between breaking strength, adhesion to concrete and l/d ratio.‎ They are used in the construction of prefabricated segments for tunnels, subways, etc.‎, Dramix® reinforcement fibres make it possible to avoid the problems of traditional reinforcement cages (poor protection of edges and corners from impact and cracks, cracking, complex shaping, high costs and time for production, storage, handling), leading to significant cost and time savings, as well as considerable technical advantages.‎ Advantages Technical Advantages " Homogeneous distribution.‎ Dramix® fibres, being diffusely present, ensure the reinforcement of ashlar edges " Multi-directional orientation.‎ Dramix® fibres ensure stress absorption in all directions.‎ " Excellent corrosion behaviour.‎ Dramix fibres remain embedded in the concrete mass and do not appear on the surface.‎ For special and aesthetic applications, galvanised and passivated Dramix® fibres can be used.‎ " Great impact resistance.‎ The impact energy absorbed by a Dramix® fibre-reinforced concrete is far greater than that of unreinforced concrete.‎ " Excellent mastery of cracking due to concrete shrinkage.‎ Economic Advantages " Reduction in grouting costs for segments damaged over time.‎ " Elimination of all slavery associated with reinforcement cages: reinforcement crews, storage area, handling, procurement, formwork placement, etc.‎ " Possible automation of dosing and introduction of fibres into the mixer.‎ " Reducing the work cycle and increasing productivity.‎ Further info from manufacturer on DRAMIX Leon Bekaert