MESH TRACK® - Сетка для основания полов

MESH TRACK® is a hexagonal twisted steel mesh, reinforced with flat twisted wires that optimise anchorage and treated with a corrosion-resistant coating, suitable for reinforcing and strengthening road foundations.‎ Advantages: -Increased resistance to structural failure -Increased surface fatigue strength -Increased load-bearing capacity -Reduction in road foundation thickness -Less excavation -Less soil to be moved -Saving of expensive backfill material -Faster execution times Steel, the reinforcement for the best road paving.‎ " High stiffness " No slackening of mesh " Permeable separating layer " High mechanical interlock " Effective load distribution " Remarkable anchoring capacity Mesh with strong gravel interlock " Due to heavy traffic, aggregates are pushed into the subgrade.‎ " Mesh Track gives high mechanical interlock with crushed aggregates; the foundation is anchored, the mesh absorbs and distributes the stresses transmitted to it (interlock effect).‎ " As a result, the foundation can resist tensile forces and avoid deformation of the road.‎ Installation procedure and recommendations1 .‎ Fix the beginning of the first roll with galvanised steel stakes.‎ Before the posts are fixed, the net is unrolled to a length of 10 m and oriented to run in the desired direction.‎ 2.‎ Unroll from the top of the roll by driving in reverse, so that the curves of the net are unloaded.‎ Avoid driving over the net.‎ 3.‎ Forming a curve: - cut the net from the inside of the curve; - form the curve by overlapping the net.‎ 4.‎ Joining MT: - longitudinal = overlap the ends; - transverse = overlap by 30 cm.‎ 5.‎ Empty the gravel truck at the beginning of the net.‎ Stand with the truck wheels on the gravel.‎ 6.‎ Level the gravel, without driving directly on the net.‎ 7.‎ Compacting the foundation layer