OKALUX OKASOLAR 3D Insulated glazing system with sun protection grid for roofs

OKASOLAR 3D is an insulated glazing system with a three-dimensional, highly reflective sun protection grid in the cavity between the glass panes.‎ The geometry of the sun protection grid has been optimised for roof applications.‎ The direct solar transmission is blocked at all times, irrespective of the height of the sun.‎ This effectively reduces the heat gain into the interior of the building.‎ At the same time a large Proportion of diffuse daylight from the northern hemisphere gets into the interior.‎ This results in even light distribution in the interior and significantly less fluctuation in brightness than with direct sunlight.‎ BENEFIT: Thanks to its three-dimensional, highly reflective sun protection grid, OKASOLAR 3D offers:  High-Performance sun protection  Reduced heat gain  Low TSET  High light Transmission  Partial trough-vision to the North  Homogenous appearance without joints  Sufficient daylight and reduction of artificial light  Maintenance and fault-free  Can be easily recycled  Visibility for birds Build-up + function The special feature of OKASOLAR 3D is that the sun protection grid is integrated into the cavity of the insulated glazing system, so there are special requirements with regard to installation, maintenance or repair, and the entire system can be treated just like standard insulated glazing.‎ The thickness and type of glass depend on structural and building requirements.‎ However, for structural reasons the bending radius is to be limited to 12 m under Deformation.‎ 2-pane build-up: Outer pane made of thermally treated glass with surrounding screen-print at face #2 Cavity: 24 mm with integrated sun protection grid and gas filling Inner pane: LSG made of float glass or Heat Strengthened Glass with low-e coating at face #3 3-pane build-up: Outer pane made of thermally treated glass with surrounding screen-print at face #2 Cavity 1: 24 mm with integrated sun protection grid and gas filling Intermediate pane made of float glass or thermally treated glass with low-e coating at face #3 Cavity 2: 8 to 12 mm with gas filling Inner pane: LSG made of float glass or Heat Strengthened Glass with low-e coating at face #5