SHERPA AQUADUE S3 - Тепловой насос воздух-вода

Olimpia Splendid's multi-purpose air-to-water heat pump, with R32 refrigerant, stands out for its ability to provide a single solution for the simultaneous management of cooling/heating and the production of high temperature DHW (up to 75°C), thanks to the patented Aquadue technology.‎ The double refrigeration circuit allows, in fact, operation in parallel, without compromising the level of domestic comfort.‎ Not only this: the possibility of storing DHW at high temperature can avoid the periodic use of anti-legionella cycles with the relative peaks in electricity consumption, as well as reducing the volume of the boiler by up to 30% for the same amount of DHW that can be delivered, thus obtaining a smaller overall size.‎ SPECIFICATIONS - Energy efficiency class in heating medium climate up to: A+++ (35°C) and A++ (55°C) - Available powers: 10 powers with R32 refrigerant single-phase (4-6-8-10-12-14-16 kW)and three-phase (12-14-16 kW) - Production of DHW (Domestic Hot Water) at high temperature, up to 75°C.‎ - DHW management: a water-to-water heat pump unit integrated in the indoor unit provides high-temperature domestic hot water irrespective of external climatic conditions.‎ - Absolute continuity of DHW availability: guaranteed by the redundancy of the dual refrigeration circuit system.‎ - Anti-legionella cycles can be avoided by using the high-temperature refrigeration cycle.‎ - Dual-stage electric heaters as standard: activation of single or dual heaters to support the heat pump through a simple configuration of the electronic control.‎ Each stage is activated according to the actual need for heat output, in order to optimise electricity consumption (supplied disabled at the factory).‎ - Configurable set points: two set points in cooling, three set points in heating (one of which for DHW): the set points can also be selected from the remote contact.‎ - Holiday and weekly programmer: heating/cooling, DHW, night-time.‎ - Climatic curves with outside air temperature probe: two curves available, one for cooling and one for heating.‎ The climatic curves make it possible to vary the temperature of the water supplying the system according to external climatic conditions, adapting the building's heating requirements to obtain energy savings.‎ - Refrigerant gases: R32* for the reversible circuit dedicated to air-conditioning and R134a** for the high temperature circuit dedicated to DHW production.‎ * Equipment not hermetically sealed containing fluorinated GAS with GWP equivalent 675 (R32) ** Equipment not hermetically sealed containing fluorinated GAS with GWP equivalent 1430 (R134a) Further info from manufacturer on SHERPA AQUADUE S3 OLIMPIA SPLENDID