SAATI SAATIstyle® 003AL Fine metalized mesh for interior and exterior applications with laminated glass

The 003 mesh, with approximately 23 wires per cm, is the perfect choice for those seeking delicate transparency paired with intense brightness.‎ Its fine texture allows for a luminous effect that interacts elegantly with light.‎ With the possibility to print uniform colors or gradient designs, this mesh can be adapted to a variety of design needs.‎ For enhanced privacy and a more pronounced reflective effect, you can combine the mesh with float glass or colored glass, highlighting the design and adding greater depth.‎ SAATIstyle® offers an exclusive range of polyester fabrics designed to meet both functional and aesthetic architectural needs.‎ Thanks to the lightweight and versatile nature of our materials, we provide solutions that are easy to handle and customize, ideal for a wide variety of applications.‎ Each metallic mesh combines technical performance with unique visual effects.‎ Additionally, to enrich the surface and add depth to projects, meshes can be used with low-iron float glass, colored glass, printed glass, or mirrors, creating even more sophisticated material and visual effects.‎ Preliminary testing  per SAATIstyle®  002AL, 003AL and 007AL have been tested in accordance with: -  EN 12600:2002 (pendulum test) - level 1B1 - UNI EN ISO 12543-4:2022 (test method for durability) - in hight temperature and hight humididity no delamination nor bubble Test configuration: 4mm Low iron glass - 0,76 Sentry Glass - SAATIstyle - 0,76 Sentry Glass - 4mm Low iron glass Recommendations When handling the fabric, it is recommended to always take care of the material to avoid any contamination that could stain the fabric.‎ We also recommend testing the compatibility between the fabric and any materials that come into contact with it.‎ The choice of the interlayer, which should be a minimum of 0.‎76mm both above and below the fabric, must be made based on the desired qualities such as resistance to humidity or mechanical stress.‎  To ensure greater insulation, we suggest leaving a 10mm perimeter without fabric to achieve better sealing and to mask the edge of the glass with an outer profile.‎  When cutting the fabric, it is important to ensure that all shapes are cut in the same direction.‎ This is because the fabric has a directional pattern which is evident during lamination.‎ The fabric can be cut either cold or hot.‎   In the latter case, we recommend avoiding excessively high temperatures to prevent burn marks on the edge.‎ It is important to note that the glass processing company is ultimately responsible for the lamination process.‎ All SAATIstyle® materials must be kept in a dry and clean indoor environment with no direct exposure to sunlight.‎ To avoid leaving impressions on materials, they must be stored horizontally within bubble wrap and never stacked.‎ Always handle with clean, lint-free gloves.‎ Further info from manufacturer on SAATIstyle® 003AL SAATI