SAATI SAATIstyle® 007AL Twill metalized mesh for interior and exterior applications with laminated glass

The 007 mesh is designed to minimize light passage and features a calendered surface that creates a unique visual effect.‎ The colors printed on this mesh stand out intensely, delivering spectacular results for both interior and exterior environments.‎ To accentuate the tactile effect and visual depth, the mesh can be combined with printed glass or mirrored glass, further enriching the surface and creating a dynamic, three-dimensional look.‎ SAATIstyle® offers an exclusive range of polyester fabrics designed to meet both functional and aesthetic architectural needs.‎ Thanks to the lightweight and versatile nature of our materials, we provide solutions that are easy to handle and customize, ideal for a wide variety of applications.‎ Each metallic mesh combines technical performance with unique visual effects.‎ Additionally, to enrich the surface and add depth to projects, meshes can be used with low-iron float glass, colored glass, printed glass, or mirrors, creating even more sophisticated material and visual effects.‎ Preliminary testing  per SAATIstyle®  002AL, 003AL and 007AL have been tested in accordance with: -  EN 12600:2002 (pendulum test) - level 1B1 - UNI EN ISO 12543-4:2022 (test method for durability) - in hight temperature and hight humididity no delamination nor bubble Test configuration: 4mm Low iron glass - 0,76 Sentry Glass - SAATIstyle - 0,76 Sentry Glass - 4mm Low iron glass Recommendations When handling the fabric, it is recommended to always take care of the material to avoid any contamination that could stain the fabric.‎ We also recommend testing the compatibility between the fabric and any materials that come into contact with it.‎ The choice of the interlayer, which should be a minimum of 0.‎76mm both above and below the fabric, must be made based on the desired qualities such as resistance to humidity or mechanical stress.‎  To ensure greater insulation, we suggest leaving a 10mm perimeter without fabric to achieve better sealing and to mask the edge of the glass with an outer profile.‎  When cutting the fabric, it is important to ensure that all shapes are cut in the same direction.‎ This is because the fabric has a directional pattern which is evident during lamination.‎ The fabric can be cut either cold or hot.‎   In the latter case, we recommend avoiding excessively high temperatures to prevent burn marks on the edge.‎ It is important to note that the glass processing company is ultimately responsible for the lamination process.‎ All SAATIstyle® materials must be kept in a dry and clean indoor environment with no direct exposure to sunlight.‎ To avoid leaving impressions on materials, they must be stored horizontally within bubble wrap and never stacked.‎ Always handle with clean, lint-free gloves.‎ Further info from manufacturer on SAATIstyle® 007AL SAATI