Saint-Gobain - ISOVER BITUVER FLEXIMAT

BITUVER FLEXIMAT is the bitumen-polymer elastomeric waterproofing membrane (BPE) with continuous filament non-woven polyester reinforcement.‎ Bituver Fleximat waterproofing membranes are made from a special BPE elastomeric compound.‎ Cold flexibility: -25°C The reinforcement is a very high grammage non-woven polyester fabric with continuous thread reinforced with glass fibre.‎ The 4 mm Mineral version is certified for single-ply use.‎ Uses FLEXIMAT membranes are used on roofs of all kinds.‎ They are suitable as underlays, monolayers, underground structures, retaining walls and foundations.‎ The MINERAL version is suitable for use as a single-layer and/or finishing layer.‎ Application - Use the PPE required by law - Clean the substrate properly - Preparation of the substrate with BITUVER ECOPRIVER primer is always recommended - FLEXIMAT is suitable for flame application by heating with a propane gas torch the lower face coated with a special thermofusible film - Always apply between +5° C and + 35° C Storage Keep the rolls in a warehouse, protected from sunlight and at a temperature not lower than +5°C.‎ Keep rolls in an upright position.‎ Avoid overlapping pallets if possible.‎ We recommend using the product within 2/3 months after delivery.‎ Further info from manufacturer on BITUVER FLEXIMAT Saint-Gobain - ISOVER