BITUVER MONOPLUS - Предварительно изготовленная битумная мембрана

MonoPlus waterproofing membranes are made with an elastoplastomeric APAO compound based on metallocene resins.‎ Cold flexibility: -20°C The reinforcement consists of a very high grammage non-woven polyester fabric with continuous thread reinforced with glass fibre.‎ The 4-mm versions (both mineral and smooth) are certified for single-layer use.‎ The membranes are also available in the California version with white reflective slate* SRI medium wind 55 - Solar Reflectance 0.‎48.‎ * Test report Dept.‎ of Mechanical and Civil Engineering EELab Uses MONOPLUS membranes are used on roofs of all kinds.‎ They are suitable as underlays, finishing layers, monolayers, underground structures, retaining walls and foundations.‎ Application - Use the PPE required by law - Clean the substrate properly - It is always recommended to prepare the substrate with bituminous primer BITUVER ECOPRIVER - MONOPLUS is suitable for flame application by heating with a propane gas torch the lower face coated with a special thermofusible film - Always apply between +5° C and + 35° C Storage Keep the rolls in a warehouse, away from sunlight and at a temperature not lower than +5°C.‎ Keep rolls in an upright position.‎ Avoid overlapping pallets if possible.‎ We recommend using the product within 2/3 months after delivery.‎ Further info from manufacturer on BITUVER MONOPLUS Saint-Gobain - ISOVER