TECNARIA DIAPASON - Соединитель для плиты пола

DIAPASON shear connector Specifications Pressed connection bracket in 3 mm thick galvanised plate.‎ Dimensions of the ribbed base plate 70×55 mm with two tilted wings 55×100 mm / 55×125 mm.‎ Shaped for use on various types of plate and designed to receive reinforcing bars.‎ Fixed to the structure with 4 high-strength nails.‎ CE certified.‎ CONNECTOR COMPOSITION The TECNARIA DIAPASON connector consists of a 3 mm thick galvanised steel plate with a ribbed rectangular base plate 70×55 mm, pressed into a “U” shape with two tilted wings.‎ There are four holes In the tilted part to accommodate steel cross bars.‎ Four high-strength steel nails go through the holes provided in the plate and fix the connector to the metal structure.‎ The available heights are 100 and 125 mm.‎ The nails used are of carbon steel Ø 4.‎5 mm, length 22.‎5 mm, Ø head 14 mm.‎ The nails used are of carbon steel Ø 4.‎5 mm, length 22.‎5 mm, Ø head 14 mm.‎ DIAPASON SHEAR CONNECTOR HEIGHT: CTFD 100 - 100 mm; CTFD 125: 125 mm INSTALLATION The application, very quick and simple, is done using the Spit P560 nail gun fitted with a special kit.‎ The connectors are secured in place using four nails, directly above the profiled sheeting laid on top of the beam.‎ The profiled sheeting must have a good adhesion to the beam, and the total thickness of two 1 mm sheets must not be exceeded.‎