Yestate Logo
AEROGIPS GF - Теплоизоляционная панель — 1
AEROGIPS GF - Теплоизоляционная панель — 2
ТеплоизоляцияAma Advanced Materials#Ama Advanced Materials#Insulation#Thermal insulation panels and felts#Thermal insulation polymer sheets and panels#Construction

AEROGIPS GF - Теплоизоляционная панель

AEROGIPS GF is a panel designed for the internal thermal insulation of building structures requiring the highest level of insulation in the smallest possible space.‎ AEROGIPS GF is a high-performance insulating panel consisting of an Aerogel-based nanotechnology insulator coupled with a high-density coated gypsum sheet for excellent thermo-acoustic comfort.‎ AEROGIPS GF has been designed for the energy requalification of existing buildings, recovery and renovation where internal intervention is required while safeguarding space.‎ It also makes it possible to design new walls in all structures where drywall systems and lightweight walls are used.‎ It is also available in different technical variants: standard, with vapour barrier, water-repellent, water-repellent with vapour bar.‎ AEROGIPS GF is suitable for both vertical partitions and for ceiling ceilings.‎ With a thickness of only 16 mm (insulation+slab) and a thermal conductivity of 0.‎015 W/mK, AEROGIPS GF makes it possible to reduce energy loss and recover space in building, residential and commercial applications.‎ AEROGIPS GF uses fibre-reinforced gypsum panels with a thickness of 10 mm and is available in different thicknesses and sizes.‎ Aerogips GF is the best product for interior renovations, building recovery and in those historical buildings subject to architectural constraints, and wherever there is a need to increase living comfort, considerably limiting installation time and costs.‎ TECHNICAL DATA Panel size 1400x720 mm Thicknesses 6/10/20/30/40/50/60 mm Plasterboard thickness 10 mm Thermal conductivity (λ) at 10 °C: 0.‎015 W/mK (EN 12667) Thermal conductivity (λ 90/90) 0.‎016 W/mK (EN 13162) Permeability to water vapour: 10 g/smPa (EN 10465 - 2008) Engagement limit temperatures: -90 / +90 °C Compressive strength (for 10% deformation) 80 (EN 826) Specific heat: 1.‎000 J/kgK (ASTM E 826) Nominal density: 11.‎00 kg/m3 Fire reaction class: A2 S1D0 (EN 13501-1) Colour: grey-white Edge finish: cut Corrosion 60° C/95% R.‎H.‎/24h: 0
0
0

Из этой же категории

Еще от бренда Ama Advanced Materials