Brunata ZENNER - Тепловой счетчик

The caltos E electronic distributor with integrated radio interface serves to record the proportional heat transfer of heating bodies.‎ With its recording and data transmission technology in accordance with the LoRaWAN® standard, the caltos E allocator fully meets the requirements of the real estate sector and users.‎ The caltos E has a particularly wide temperature range from 35 °C to 130 °C and is therefore suitable for use in heating systems with these design temperatures (especially low-temperature systems).‎ The caltos E can be used in both single-pipe and the increasingly common double-pipe heating systems.‎ The caltos E distributor works according to the two-sensor measuring principle, whereby high-precision sensors continuously detect even the smallest temperature variations between the heating body and the room.‎ The measured data is then reliably stored and used to determine consumption precisely and accurately.‎ In addition, in the event of an external thermal influence (e.‎g.‎ tampering or condensation formation), the instrument automatically switches from 2 to 1 sensor.‎ By means of plausibility checks of the room air and heating body temperatures, the instrument is able to differentiate between possible extraneous heat sources already during the heating phase.‎ Technical product features - Application range from 35 °C up to 130 °C average design fluid temperature - Display of the storage of the current consumption of the expiry date value and the last 18 end-of-month values in the device memory [2] (each in unit scale) - In the device memory current consumption, 2 fixed day values and 18 monthly values - middle and end of month - as well as 31 daily values - Day of reading freely selectable via software - Battery power supply guaranteed for 10 years + reserve - Infrared interface for data reading, recall of different display levels and programming of the instrument - Consumption data reading via wireless LoRaWAN® (standard scenario for monthly values) - Unit and product scaling possible, freely programmable via software - Continuous internal self-checks - Electronic recording of tampering attempts - High protection against thermal, electrical and magnetic disturbances