Bussi Up-and-over garage door Up-and-over solid wood garage door

The tailor-made wooden garage swing doors, to make the most of the available space, have a solid metal structure covered with treated wooden boards, to which it is also possible to apply motorised opening/closing systems.‎ The moving panel structure is suitable for wood beading.‎ Provided with a safety device in case of accidental closure of the moving panel, lateral internal sealings, counterweight cover panels of zinc-coated steel sheets pre-painted with a white RAL9016 paint, handling handle, lever arms, lifting cables and counterweights.‎ Lock provided with a profile cylinder, keyhole cover and ABS handle; Painted exterior trims of 5-7-10 cm on the perimeter, bottom rubber sealing, HF configuration (except motor) and insulated moving panel with fireproof polystyrene class 1 + internal steel sheet with Greek frets, configuration for HF motorization.‎ PAINTING: The paints used on all our fixtures are BIO, in fact we have paid particular attention to the production cycle, choosing health first and foremost.‎ Stop oil, cut carbon dioxide emissions and above all pay attention to people's health.‎ Painting carried out with organic single-component water-based impregnator or paint with a three-coat painting cycle: the first coat consists of the application of transparent or colored fungicidal impregnating agent by immersion and drying in a constant temperature environment; the second coat consists of the air-mix application of a thixotropic water primer to protect the window from UV rays, drying in a constant temperature environment, sanding with an automatic brushing machine and dusting with control of the pieces; the third coat consists of the air-mix application of a thixotropic water-based finish for exteriors in a quantity of 300 microns of wet film, drying in a constant temperature environment, recovery and control of the pieces.‎ Further info from manufacturer on Up-and-over garage door Bussi