POLIISO® CC - Панель теплоизоляционная из полиуретановой пены

POLIISO® CC is a thermal insulation panel consisting of a yellow, closed-cell, rigid polyiso (polyurethane foam) expanded without the use of CFCs or HCFCs between two bituminous felt board supports.‎ The panels declare λD values of 0.‎027 W/mK for thicknesses up to 40 mm, 0.‎026 W/mK for thicknesses from 50 mm to 80 mm, and 0.‎025 W/mK for greater thicknesses, according to European standard EN 13165.‎ The panels have compressive strength values ≥ 130 kPa and dimensions 600x1200 mm.‎ The panels are available in thicknesses from 30 to 100 mm.‎ POLIISO® CC complies with the Minimum Environmental Criteria (CAM).‎ APPLICATIONS WITH POLIISO® CC: Warm roofing under bituminous membrane in ballasted or paved roofs.‎ POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎