Fakro DMC-CP2, DEC-C P2 / DEC-C U8 - Окно для крыши из ПВХ

Models DXC-CP2 (non-opening, with 2 seals), DMC-CP2 and DEC-CP2 (manual and electric opening respectively, with 3 seals) are windows for flat roofs (maximum slope 15°) with multi-chamber PVC frames, fitted as standard with a double glazing unit (4H - 14 with argon gas - 33.‎2T) with toughened outer glass and laminated inner glass (for security), in anti-extraction class P2A.‎ Dimensions range from 60 x 60 cm up to 120 x 220 cm.‎ The dome above is made of polycarbonate, a material resistant to impact and atmospheric agents (rain, hail), and is coated with special external and internal films for protection against UV radiation.‎ The overall thermal transmittance of the window frame (Uw) is 1.‎2 W/m2K (according to EN 12567-2) and the passive house version with triple glazing is also available.‎ The type C flat roof window is equipped with a double glazed unit with laminated internal glass which is anti-burglary P2A class as standard.‎ Should the pane crack, shards of glass do not pose a danger but remain on the laminate film.‎ The P2 glazing unit has an innovative and patent-pending dome installation system which increases its anti-burglary resistance.‎ The dome is made of durable polycarbonate.‎ It is characterised by high resistance to impacts and adverse weather conditions such as rain or hail.‎ Special coatings on the outer and inner surface of the dome protect it against UV radiation.‎   GLAZING UNITS The heat transmittance co-efficient for the whole window is U=1.‎2 W/m2K (to EN 12567-2) which is as much as 14% better result than compared with other manufacturer’s windows of a similar size.‎ The product range also includes a quadruple U8 glazing unit.‎ Heat transmittance co-efficient for the whole D_C U8 window is U=0.‎72 W/m2K (to EN 12567-2) (U=0.‎55 W/m2K to EN 1873) and makes the window suitable for energy-efficient and passive buildings.‎   ACCESSORIES The structure of the window enables installation of internal as well as external accessories.‎ A patent-pending system of profiles enables the installation of the awning blind under the dome of the flat roof window, thus protecting the blind against damage as a result of strong winds etc.‎   INSTALLATION RANGE The type C flat roof window is suitable for roof pitches between 2 and 15 degrees.‎ Further info from manufacturer on DMC-CP2, DEC-C P2 / DEC-C U8 Fakro