FF SYSTEMS MA-BSZ - Нержавеющая сталь инспекционная камера

The MA-BSZ floor drain is made of 2.‎5 mm thick stainless steel.‎ The depth of the tray is 50 mm and the installation height is 75 mm.‎ The frame is equipped with a special frost- and weather-proof seal to prevent water infiltration and odors.‎ The frame is fixed with a cast at floor level.‎ The tray can then be filled and inserted into the frame.‎ The opening is supported by two high-quality gas pistons, allowing the cover to be opened and closed by a single person.‎ Safety is ensured by a fall protection device.‎ The tray can be filled with stone, tile, concrete, resin, granite, wood, hard floors, or other types of materials.‎ With a central locking system, it can be opened from both the inside and outside.‎ The "FIRE-RESISTANT" version is equipped with a fire-resistant plate located at the bottom of the tray, ensuring EI90 fire protection.‎ Measurements External Frame Measurement: Clearance + 101/124 mm Special advantages of the system With fire protection plate Central locking: can be opened from both the outside and inside Power-assisted and fall-proof opening With frost- and weather-proof seal With fixing brackets for a secure seal Tray secured to the frame with screws With reinforcing crosspieces Load Up to Class B125 according to EN 124 Area of ​​Application For manhole covers that are opened frequently and without any particular effort, where fire protection and opening from the inside are required.‎ Opening and Assembly Supplied with a tightening/lifting key and assembly manual.‎ Installation must be performed by a professional, paying particular attention to ensuring that the special seal adheres tightly to the frame profile.‎