FF SYSTEMS MA-WT - Инспекционная камера из нержавеющей стали

The MA-WT floor drain is made of 5 mm thick stainless steel.‎ The frame features a special frost- and weather-proof seal to prevent water infiltration and odors.‎ The frame is fixed to the floor with a concrete slab.‎ The stainless steel knurled sheet metal plate is secured with a screw and a brass protective cap.‎ The opening is supported by two high-quality gas pistons, allowing the cover to be opened and closed by a single person.‎ Safety is ensured by a fall protection device.‎ The installation height is 220 mm.‎ Measurements External Frame Measurement: Clearance + 150mm Special advantages of our system With stainless steel knurled plate With frost- and weather-proof seal With fixing brackets for a secure seal Tray secured to the frame with screws With reinforced crosspieces Power-assisted opening and fall protection Load Version 1 up to Class D400 according to Standard EN 124 Version 2 Thermal: Class D400 according to Standard EN 124 Area of ​​application For both indoor and outdoor floor ducts, where the highest quality is particularly appreciated and also suitable for heavy loads.‎ Opening and Assembly Supplied with a tightening/lifting wrench and assembly manual.‎ Installation must be performed by a professional, paying particular attention to ensuring that the special seal adheres tightly to the frame profile.‎ Closing The lid is equipped with a screw closure with a brass protective cap.‎ Optional security cylinder lock (cylinder length 41.‎5 mm)