LAB23 NECK Curved galvanized steel bench with integrated planter

The NECK planter is made in steel 30/10 thickness.‎ To obtain the peculiar conical shape characterizing the planter, the steel sheets go through a specific calendering and are later welded through continuous welding.‎ On the perimeter of the upper side a band of 35 mm 30/10 thickness is is welded.‎ On the bottom of the planter there are 3 drain pipes, made in steel, section 30x30x2 H 50 mm.‎ Under the planter there's a base for the correct leveling.‎ The base is covered with a stainless steel AISI 316 band 15/10 thickness.‎ The seat is made with 16 exotic wood elements 40 mm thickness, 420 mm length, 170 mm maximum width, fixed with specific screws to a laser-cut plate 30/10 thickness.‎ The plate is welded to supports made in tubular steel with section 40x40x2mm.‎ For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and powder coating.‎ Such cycle is meant to guarantee the protection of the painted products, in an environment of C4 corrosion class, as requested by the UNI regulations EN ISO 12944-2.‎ The products are eventually polyester-powder coated with RAL colours at choice.‎ The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils.‎ Weight of steel: 280 kg Capacity: 1740 lt Further info from manufacturer on NECK LAB23