RENSON ENDURA® TWIST Ventilation system for aluminum windows

Renson presents the final version of the decentralised Endura Twist ventilation system as a modular construction system.‎ The sensor-controlled alternating mechanical ventilation system, with heat recovery, which has already been available for some time, was tailored during its development to the requirements of a burgeoning ventilation market and covers a broad range of services with its modular construction.‎ With a heat recovery efficiency of better than 80% at 30 m³/h air output, the system achieves the best efficiency class A+.‎ The integrated bypass technology circumvents the heat exchanger if need be and in this way allows use in summer as an automatic ventilation and extraction system.‎ With a minimum length of only 750 mm, Endura Twist makes it possible to use even very narrow window openings.‎ In the final version, Endura Twist is just as suitable for renovation as for new builds.‎ It can be used as a standalone system, but can also be incorporated into a building management system.‎ It can be installed visibly, clad with drylining systems or plastered, horizontally above a window or vertically to the side of a window.‎ Integration of a vertical sunscreen with ZIP guiding system is possible.‎ With this extensive range of uses, Endura Twist is recommended for all applications in both renovation and new building, which cannot be achieved with a central ventilation system, because of ceiling heights that are too low, for example in residential construction or prefabricated building.‎ Further info from manufacturer on ENDURA® TWIST RENSON