RENSON HEALTHBOX 3.0 Mechanical forced ventilation system

Healthbox 3.‎0 ensures that there is fresh air in your home in a smart, fully automated manner.‎ This new generation of demand-controlled ventilation is ready to use in all “smart homes” because, from now on, it communicates with both the installer and the resident through a linked app.‎ This makes the installation of the ventilation even more practical for you as an installer.‎ Healthbox 3.‎0: intelligent and energy efficient Thanks to the built-in sensors that continuously measure the level of humidity, CO2 and/or VOC (volatile organic compounds, or “odours”), the Healthbox 3.‎0 can adapt the ventilation levels where and when necessary.‎ The SmartConnect connection turns the Healthbox 3.‎0 into a connected ventilation system for smart homes.‎ The unit is equipped with a new, even more energy efficient (up to 30% less consumption at the same flow rate) and silent ventilator.‎ The Healthbox is a part of the C+ ventilation system (supply through window ventilation) and ensures a gain of up to 23 points in the home’s E-level.‎ Compact metamorphosis The Healthbox 3.‎0 ventilation unit has a sleek design and comes in at just barely 20 cm high.‎ This makes it easy to recess compactly and hide away.‎ If the connections are far enough apart, it makes it easy to connect the Easyflex air ducts with two next to each other from now on.‎ The various valves (which have been redesigned for improved operation) can now be connected remotely, instead of directly on the unit.‎ By using the collectors, even more spaces can be ventilated (up to a maximum of 11) instead of the available 7 connections on the ventilation unit.‎ This means that the Smart Zone principle (including extraction in the bedrooms) can be more easily applied and installed in a more compact manner using fewer pipes.‎ Installation app The Healthbox 3.‎0 application developed especially for the installer makes it a lot easier to install and regulate the ventilation unit.‎ All of the parameters, such as a pressure drop, the set flow rate, etc.‎, have been visualised using a well-organised, step-by-step plan.‎ The manual setting of dip switches is also a part of the past because now it can be done using the app so that the flow rate of the separate extraction points can be directly adjusted if necessary.‎ Moreover, the necessary documents for the EPB application are automatically created after regulating the system.‎ Further info from manufacturer on HEALTHBOX 3.0 RENSON