Winkler PRE-ONE® - Быстросохнущий раствор

PRE-ONE® is a one-component, thixotropic, quick-setting mortar, specific for the levelling and repair of damp substrates, even at extreme temperatures (from 0° to +45°C).‎ It is used to restore patches (up to 2 m²), both horizontally and vertically, of concrete substrates, cement screeds, plaster, etc.‎, before the subsequent laying of ONE, ONE VERTICAL or ONE FLOORING.‎ Product with excellent workability, which can be applied in thicknesses from 2 to 20 mm, even in a single coat.‎ APPLICATION It can be applied with a spatula or trowel.‎ CONSUMPTION 1.‎7 kg/m² per mm of thickness.‎ SURFACE PREPARATION Remove the degraded concrete, if necessary carefully sand or wash the surface, which should be free from salt, oil, grease, flaky parts and foreign or non-stick substances, with a pressure washer and water.‎ Wet base thoroughly before application.‎ In the presence of oil stains proceed as described below: remove about 2 mm of the base where oil is present, remove dust and immediately apply ONE PRIMER (primer for oily foundations) with a roller or flat brush, continue immediately to dust with quartz 01-05.‎ Wait at least 24 hours before restoring holes with PRE-ONE.‎ USEFUL ADVICES Mix well until a homogeneous mixture is obtained.‎ The product can be applied at temperatures between 0°C and +45°C.‎ For repairs in areas greater than 1m² (maximum 2 m²) and for thicknesses greater than 1 cm, apply the product in 2 coats.‎ With this specific method of application, any damage to the product after applying the first coat can be restored with the second coat.‎ Sand the surface of PRE-ONE and remove the dust before the subsequent laying of the liquid membranes.‎ PACKAGING 25 kg bags.‎ 15 kg bags.‎ STORAGE The product, in its undamaged packaging and stored in a dry and protected place, has a shelf-life of 12 months.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on PRE-ONE® Winkler