WINPLAN 370

WINPLAN 370 is a premixed, quick-drying screed for both internal and external settings.‎ It allows the creation of adherent screeds with thicknesses from 1 cm to 3 cm and floating screeds from 3 cm to 8 cm, applied in one coat, in one single application without stopping.‎ Applicable on new or old slabs, boilers, concrete, radiant floors, or existing floors.‎ Ideal for balconies, terraces, offices, residential environments, floors with high pedestrian traffic, such as shopping centres or industrial floors.‎ It can be coated with ceramic, resilient materials, natural stone, parquet, wood, or any other coating where a quick drying is required.‎ APPLICATION The product is used to create both adherent screeds, using ADEGUM LATEX or WINCOLLA as adhesion promoters (see technical data sheet), or floating load distributing layers.‎ In the latter case, suitable layers are recommended for the specific intended use.‎ For application on radiant floors, a thickness of at least 3 cm above the pipes is recommended.‎ If parquet must be installed, the layer must not be less than 4 cm and with residual humidity less than 2% (UNI 10329- UNI 11371 and UNI 11515-1 standards) Mix with 2.‎5 litres of water per bag, until a homogeneous mixture with a consistency of “damp earth” is obtained.‎ With thicknesses from 4 cm to 8 cm, place electro-welded galvanized mesh with 5x5 cm mesh, ø 2 mm, at about half of the thickness.‎ Alternatively, use FIBER HD synthetic fibers (0.‎5% of the total weight).‎ The finishing with a trowel must be carried out within 60 minutes of application, until a closed and smooth surface is obtained.‎ CONSUMPTION 19 - 20 kg/m² per cm of thickness.‎ USEFUL ADVICES Do not add cement or additives.‎ Do not use if bag is damaged.‎ Do not add water when the mix begins to grip.‎ Do not apply on asphalt surfaces or surfaces treated with bitumen.‎ Create the insulation joint along the entire perimeter and around the pillars and the hydrometric shrinkage joints, following the appropriate diagram shown in the technical data sheet.‎ Provide a protective layer on substrates that require a vapor barrier, or in case of applications that require a barrier against capillary rising damp.‎ PACKAGING 25 kg bags.‎ STORAGE The product, in its undamaged packaging and stored in a dry and protected place, has a shelf-life of 12 months.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on WINPLAN 370 Winkler