Yestate Logo
WINLIVEL RAPID - Самовыравнивающаяся стяжка — 1
WINLIVEL RAPID - Самовыравнивающаяся стяжка — 2
WINLIVEL RAPID - Самовыравнивающаяся стяжка — 3
WINLIVEL RAPID - Самовыравнивающаяся стяжка — 4
WINLIVEL RAPID - Самовыравнивающаяся стяжка — 5
Отделочные материалыWinkler#Winkler#Products for floors and walls installation#Self-levelling screeds#Construction#Self-levelling screed

WINLIVEL RAPID - Самовыравнивающаяся стяжка

WINLIVEL RAPID is a cement-based pre-mixed self-levelling compound, with an ultra-fast setting (4 hours at +20°C), for thicknesses from 1 mm to 20 mm, for both internal and external applications.‎ It can also be used at low temperatures (up to +2°C).‎ Can be used for grinding of existing floors or screeds.‎ It guarantees a smooth and solid surface suitable for overlapping ceramic, marble, terracotta, stoneware, parquet, resilient flooring, and liquid waterproofing coatings from the WINKLER range.‎ Mix with clean water at low speed to obtain a perfectly homogeneous and lump-free mixture.‎ Wet to excess before applying.‎ To facilitate the distribution of the product on the support, it is advisable to use a metal spatula and exert slight pressure.‎ Run a bubble-breaking roller over the still fresh product to eliminate any air bubbles.‎ After 3 hours (at +20°C) it acquires the mechanical resistance to be walkable.‎ After 4 hours (at +20°C) it is possible to overlap ceramic floors and liquid membrane.‎ After 7 days (at +20°C) it is possible to overlap stone materials, linoleum, wood, and parquet.‎ CONSUMPTION 2.‎0 kg/m² per millimetre of thickness.‎ USEFUL ADVICES Do not add cement or additives.‎ Do not use if bag is damaged.‎ In case of wood, parquet and other coatings that are particularly sensitive to moisture, a thickness of ≥ 5mm must be applied.‎ Always check, using a carbide hygrometer, that the residual humidity is equal to or less than 2%, before overcoating.‎ Apply at temperatures between +2°C and +35°C.‎ Protect from sun and wind for the first 24 hours, if necessary, continue to moisten the surface even after application.‎ All joints in the substrate must always be respected.‎ Desolarize from the walls and from all the emerging vertical elements.‎ To make the joints, refer to the UNI EN 11493-1 standard.‎ PACKAGING 25 kg bags STORAGE The product, in its undamaged packaging and stored in a dry and protected place, has a shelf-life of 12 months.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on WINLIVEL RAPID Winkler
0
0

Из этой же категории

Еще от бренда Winkler