WINPLAN PRO

WINPLAN PRO is a special premixed, quick-drying cementitious screed, formulated to ensure high hydrophobic strength (very low water absorption), without hindering its breathability.‎ It is particularly suitable for exterior projects when atmospheric conditions are not stable.‎ It allows the creation of adherent screeds with thicknesses from 1 cm to 3 cm and floating screeds from 3 cm to 8 cm, applied in one coat, in one single application without stopping.‎ It guarantees exceptional workability.‎ Applicable on new or old slabs, boilers, concrete, radiant floors, or existing floors.‎ Ideal for balconies, terraces, bathrooms, changing rooms, floors with high pedestrian traffic such as shopping centres or industrial floors.‎ It can be coated with ceramic, resilient materials, natural stone, wood, or any other coating where a quick drying is required.‎ APPLICATION The product is used to create both adherent screeds, using ADEGUM LATEX or WINCOLLA as adhesion promoters (see technical data sheet), and floating load distributing layers.‎ In the latter case, suitable sheets are recommended for the specific intended use.‎ For application on radiant floors, a thickness of at least 3 cm above the pipes is recommended.‎ Mix with 2.‎5 litres of water per bag, until a homogeneous mixture with a consistency of “damp earth” is obtained.‎ With thicknesses from 4cm to 8 cm, place electro-welded galvanized mesh with 5x5 cm mesh, ø 2 mm, at about half of the thickness.‎ Alternatively, use FIBER HD synthetic fibers (0.‎5% of the total weight).‎ The trowel finish must be carried out within 60 minutes of application, until a closed and smooth surface is obtained.‎ CONSUMPTION 19 - 20 kg/m² per centimetre of thickness.‎ USEFUL ADVICES Do not add cement or additives.‎ Do not use if bag is damaged.‎ Do not add water when the mix begins to grip.‎ Do not apply on asphalt surfaces or surfaces treated with bitumen.‎ Create the insulation joint along the entire perimeter and around the pillars and the hydrometric shrinkage joints, following the appropriate diagram shown in the technical data sheet (UNI EN 11493-1).‎ Provide a protective layer on substrates that require a vapor barrier (UNI EN 13970 standard), or in case of applications that require a barrier against capillary rising damp (UNI EN 13969 standard).‎ PACKAGING 25kg bags.‎ STORAGE The product, in its undamaged packaging and stored in a dry and protected place, has a shelf-life of 12 months.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on WINPLAN PRO Winkler