POLIISO® CURVO - Теплоизоляционная панель

POLIISO® CURVO is a thermal insulation panel made of rigid, closed-cell polyiso foam, with notches at regular intervals that allow it to adapt perfectly to the shape of the building on which it is to be installed.‎ POLIISO CURVO is compatible with all POLIISO panels, i.‎e.‎ with all available surface coatings.‎ The technical characteristics are as follows: milling pitch 50 mm; milling width 3 mm; milling depth 3/4 of thickness.‎ POLIISO CURVO originates from the need to solve the application problems of roofing in precast concrete elements, but can be used in all cases where the insulating layer is to be applied on non-coplanar surfaces.‎ The panels have standard dimensions of 1200 x 1200 mm and are available in thicknesses from 20 mm to 100 mm.‎ POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎ Further info from manufacturer on POLIISO® CURVO Ediltec