OVER-FOIL RAD - Алюминиевый теплоизоляционный войлок

OVER-FOIL RAD is a heat-reflective insulation material in rolls consisting of an inert polyethylene air bubble covered, on both faces, with a protected pure aluminium foil.‎ Ideal for a perfect vapour barrier.‎ ADVANTAGES Excellent thermal insulation value and guaranteed comfort, thanks to the reflective surfaces it cancels out solar radiation with great benefit for the inhabitants of high-floor dwellings.‎ Great energy saving: by reflecting the heat inside the room, it allows it to be heated quickly in winter and in summer (if the room is air-conditioned).‎ 100% vapour and water barrier.‎ Easy and pleasant to install: no special tools are needed for the installation.‎ Significant indirect savings: in terms of storage, warehousing, transport, handling on the building site and yield in the installation.‎ OVER-FOIL RAD in a wall " High thermal insulation value Certified thermal resistance of the OVER-FOIL RAD product alone in a 2 cm air gap: R= 1,27± 0,02 m²K/W (test n°171187 of 28/04/03 carried out by Istituto Giordano S.‎p.‎A.‎) λ of the insulation system : 0.‎033 W/mK INSTALLATION Install wooden laths (min.‎ thickness 15 mm) using dowels or nails.‎ Fix the OVER-FOIL RAD panel to the laths using a staple gun or large head nails.‎ Make the joints between the panels using the aluminium adhesive tape.‎ Erect the internal counterpart leaving an air gap of at least 15 mm.‎ ADVANTAGES - Excellent thermal insulation value and guaranteed comfort, thanks to the reflective surfaces it cancels out solar radiation, which is of great benefit to the inhabitants of high-floor housing units.‎ - Great energy saving: by reflecting heat back into the room, it allows the room to be heated quickly in winter and in summer (if the room is air-conditioned).‎ - 100% vapour and water barrier.‎ - Easy and pleasant to install: no special tools are required for installation.‎ - Significant indirect savings: in terms of storage, warehousing, transport, handling on site and yield in installation.‎ GENERAL DATA Thickness 3mm Roll height 120 cm Roll length25 ml Roll development 30 m² Roll diameter 30 cm Weight 140 g/m² OVER-FOIL RAD IN A WALL " High thermal insulation value Certified thermal resistance of the OVER-FOIL RAD product alone in a 2 cm air gap: R = 1.‎27± 0.‎02 m²K/W (test no.‎ 171187 of 28/04/03 carried out by Istituto Giordano S.‎p.‎A.‎) λ of the insulation system: 0.‎033 W/mK INSTALLATION Install wooden laths (min.‎ 15 mm thick) on the external wall using dowels or nails.‎ Fix the OVER-FOIL RAD panel to the laths using a stapler or wide-head nails.‎ Make the joints between the panels using the special aluminium adhesive tape.‎ Erect the internal counterpart leaving an air gap of at least 15 mm.‎