PAVERWOOD - Внешний masonry блок из древесно-бетона

EGH 43,5/21,5 is a wood-concrete infill block.‎ Technical characteristics: Type of insulation: EPS+Graphite Insulation thickness: 21,5 Concrete thickness: 13 Litres of concrete per wall: 112.‎3 Weight of block in Kg.‎ +/- 10%: 10 Weight of plastered wall: 373 Wall transmittance "U "*: 0.‎12 Surface mass: 328 * Thermal transmittance calculated using the two-dimensional method in accordance with UNI-TS 13788, UNI 10355 and UNI 10351 Where the geometry of the building does not allow the use of the blocks as load-bearing walls, it is possible to use them in panels.‎ Proceed by connecting the wall to the pillars with horizontal iron bars, this is an easy operation since the blocks are still filled with concrete to guarantee a certain mass that allows for a proper check of the displacement and resistance to expulsion of the panels as provided for by NTC 2008; for panels with filled wood-concrete shuttering blocks the limit movements are .‎01 h.‎ The quality of the product starts with the raw material.‎ The company produces the blocks using only the chips from PEFC certified spruce, only raw material that guarantees high quality standards; sawdust and dust are removed with special vibrating screens.‎ The petrified wood chips are mixed with “Portland” cement, and then printed and dried naturally, so as to obtain a fully ecological block that does not burn, does not rot, is highly breathable and has high thermal and acoustic insulation.‎ For purely acoustic blocks, the density is further increased.‎