PLASMACEM GRECATA - Матрица для стен из бетона с видимой фактурой

Maximum single piece dimensions: base mm 1000 x height mm 3000.‎ Available in Elastomeric for 100 uses.‎ FEATURESMATrices ON DESIGN The company supplies matrices with special designs not included in the basic supply, made with the same mechanical and technical characteristics.‎ USE STONCLEAR matrices are simply inserted between wooden or iron formwork and fixed with classic spacers.‎ We recommend the use of our special release agent.‎ For masonry up to one metre high (see adjacent photo) PLASMACEM will supply the matrices with a light frame that will make them self-supporting.‎ For masonry over 70 cm.‎ thick, we recommend stripping within 24 hours.‎ There are no special requirements for their storage on site, they can withstand high temperatures as well as cold climates, and there is no need to store them in areas protected from the weather.‎ STONCLEAR series matrices, are therefore to be considered not only an exclusive product that allows you to create aesthetically performing lime surfaces, but also a real equipment that implements building capabilities.‎ SUPPLY AND STORAGE STONCLEAR series matrices are supplied in pallets of max.‎ 25 pieces for a maximum footprint of 1 mc.‎.‎ No trimming is required at the time of use.‎ There are no particular problems with handling, which can be done either by hand, given the low weight, or with the aid of forklifts for the complete pallet.‎ The only care to be taken during dismantling is not to use sharp elements to facilitate detachment of the die from the part.‎ CUSTOMER SERVICES If test castings are required, PLASMACEM SRL will send the customer a die for viewing.‎ To obtain a price list of the basic products in production and/or an estimate for any type of finish, simply send an e-mail to info@plasmacem.‎com.‎ The sales department will reply as soon as possible.‎ PLASMACEM srl also provides, on request, an on-site consultancy service for the first use of the dies.‎ The cost of this service will be established directly with the customer.‎ Form liners for architectural concrete by PLASMACEM Using form liners for architectural concrete allows you t • Create patterns on exposed concrete walls.‎ • Adapt buildings to meet all aesthetic needs.‎ • Obtain even surfaces in a simple and cost-effective manner, thanks to the play of light and shadow that can be generated.‎ STONCLEAR Form liner for casting in situ • form liners in cyclic density polyurethane, fortified by synthetic resins.‎  • 3 - 100 reuses.‎  • fixing to formworks with glue or screws.‎ • fixing to plastic formworks with magnets.‎ • improved pull-out assembly.‎ To achieve the best results, we recommend that you: • Use class S4 concrete and a suitable superplasticizer.‎ • Use a concrete recipe suitable for exposed surfaces.‎ • Store in a dry place protected against direct exposure to frost, sun, and rain.‎ The form liners by Plasmacem are delivered to size taking into account the information on construction site requirements.‎ The dimensions of the products delivered are guaranteed with a tolerance of ± 0.‎5%.‎ The concrete release must take place within 24 hours of the casting.‎