PLASMACEM PIETRAGLIA - Матрица для стен из бетона с лицевой отделкой

Maximum single piece dimensions: base mm 1000 x height mm 3000.‎ Available in Polyurethane for 50 uses.‎ Available in Elastomeric for 100 uses.‎ Form liners for architectural concrete by PLASMACEM Using form liners for architectural concrete allows you t • Create patterns on exposed concrete walls.‎ • Adapt buildings to meet all aesthetic needs.‎ • Obtain even surfaces in a simple and cost-effective manner, thanks to the play of light and shadow that can be generated.‎ STONCLEAR Form liner for casting in situ • form liners in cyclic density polyurethane, fortified by synthetic resins.‎  • 3 - 100 reuses.‎  • fixing to formworks with glue or screws.‎ • fixing to plastic formworks with magnets.‎ • improved pull-out assembly.‎ To achieve the best results, we recommend that you: • Use class S4 concrete and a suitable superplasticizer.‎ • Use a concrete recipe suitable for exposed surfaces.‎ • Store in a dry place protected against direct exposure to frost, sun, and rain.‎ The form liners by Plasmacem are delivered to size taking into account the information on construction site requirements.‎ The dimensions of the products delivered are guaranteed with a tolerance of ± 0.‎5%.‎ The concrete release must take place within 24 hours of the casting.‎