Poron Pred

Poron Pred is used for in-situ slabs with continuous formwork from below; unlike Pred, Volt is equipped with fins that, when touching, interrupt the thermal bridge.‎ The EPS piñatas allow a lightened slab to be assembled and laid much more quickly than a brick slab.‎ Subsequently, the elements will be integrated with reinforcing iron and electro-welded mesh and concrete cast to form the slab with a minimum thickness of 4/5 cm, as specified.‎ It is advisable for the finishing of the soffit to use metal profiles to be mechanically fixed to the concrete joists, creating an air space where the electrical systems can pass through.‎ On the same metal profiles mechanically fix the Neogess product, eliminating any thermal bridges created by the joists.‎ The finish will be dry-plastered.‎ Alternatively, after using an adhesion promoter and a suitable plaster net, the intrados can be plastered.‎ Lightening element for floor slab.‎