PORONVOLT - Элемент облегчения для перекрытия

Poron Volt is used for slabs cast in place with continuous formwork from below, unlike Pred, Volt is equipped with fins that, when touching, interrupt the thermal bridge.‎ The EPS piñatas allow a lightened slab to be assembled and laid much more quickly than a brick slab.‎ Subsequently, the elements will be integrated with reinforcing iron and electro-welded mesh and concrete cast to form the slab with a minimum thickness of 4/5 cm, as specified.‎ It is advisable for the finish of the soffit to use metal profiles to be mechanically fixed to the concrete joists, creating an air space where the electrical systems can pass through.‎ On the same metal profiles mechanically fix the Neogess product, eliminating any thermal bridges created by the joists.‎ The finish will be dry-plastered.‎ Alternatively, after using an adhesion promoter and a suitable plaster net, the intrados can be plastered.‎ Lightening element for floor slab.‎ Further info from manufacturer on PORONVOLT Poron