FULLFLOW DX - Водяной холодильный агрегат

Water-cooled water chillers.‎ Range with stepless semi-hermetic screw compressors and R513A ecological refrigerant gas.‎ CONSTRUCTION FEATURES • Compressor: high energy efficiency semi-hermetic screw compressor with control of linear capacity, with star-delta or part-winding start up (depending on models) and complete with integral protection, casing heater and refrigerant gas outlet piping shut-off valve.‎ • Water side heat exchanger (evaporator): dry expansion shell and tube exchanger with counterflow heat exchange, complete with closed cell polyurethane foam rubber insulation, water flow differential pressure switch and Victaulic fittings.‎ Antifreeze heater sizes 1200-1230.‎ • Water side heat exchanger (condenser): tube and shell complete with differential pressure switch, safety valve, service valve on the high-pressure refrigerant gas circuit.‎ • Control: microprocessor electronic control.‎ • Structure: made of galvanised and painted steel plate with polyester powder coating.‎ • The unit is also complete with: - clock board; - display of cooling circuit high/low pressure; - electronic expansion valve; - Master/Slave control up to 4 units in parallel; - 0-10V analogue signal for condensing control from external device; - control of Variable Primary Flow (VPF_R).‎ VERSIONS • T - High efficiency version MODELS • TCHVTL: unit designed for cooling only.‎ Further info from manufacturer on FULLFLOW DX Rhoss