Rhoss FULLFLOW VFD (1+I) - Водяной холодильный агрегат

FULLFLOW VFD (1+I) are water-cooled water chillers.‎ Range with semi-hermetic screw compressors with variable Vi, inverter regulation and R513A refrigerant gas.‎ CONSTRUCTION FEATURES • Compressor: high energy efficiency semi-hermetic screw driven by fixed speed motor with linear capacity control and/or variable Vi regulated by inverter (25%-100% single-compressor sizes, 12.‎5-100% bi-compressor sizes), limited start, complete with integral protection, casing heater, oil level sensor and shut-off valves on delivery and intake piping.‎ • Water side heat exchanger (evaporator): low refrigerant charge spray flooded type shell and tube exchanger, complete with closed cell polyurethane foam rubber insulation, water flow differential pressure switch and Victaulic fittings.‎ • Water side heat exchanger (condenser): tube and shell complete with safety valve, service valve on the high-pressure refrigerant gas circuit, and a water flow differential pressure switch and Victaulic fittings.‎ • Control: microprocessor electronic control.‎ • Structure: made of galvanised and painted steel plate with polyester powder coating.‎ • The unit is also complete with: - clock board; - electronic expansion valve; - display of cooling circuit high/low pressure; - Master/Slave control up to 4 units in parallel; - 0-10V analogue signal for condensing control from external device; - control of Variable Primary Flow (VPF_R).‎ VERSIONS • T - High efficiency version MODELS • TCHITL: unit designed for cooling only.‎ Further info from manufacturer on FULLFLOW VFD (1+I) Rhoss