WAVIN ITALIA VENTIZA SOLO 30A-2

Ventiza SOLO 30A-2 is a decentralized controlled mechanical ventilation unit with alternating double flow and high-efficiency heat recovery unit.‎ The SOLO A range consists of three different models: 60A, 30A-2, 60A-2.‎ The models are distinguished by different electronics and maximum air flow rate.‎ The 30A-2 and 60A-2 models are equipped with a remote control with capacitive keys and a display that facilitates use by the end user.‎ Furthermore, it is possible to operate the units in night mode (fourth speed), to obtain maximum acoustic comfort, and it is possible to reset filters directly from the remote control.‎ All models can operate in extraction only or in input only.‎ Furthermore, it is possible to connect up to 16 units in Master/Slave mode, allowing the management of the entire system with a single remote control from the unit set as Master.‎ The 30A-2 model delivers a maximum flow rate of 30 m3/h (100 mm duct diameter).‎ All models are equipped with double separate filters for incoming and outgoing air that are easily removable and washable, a ceramic heat exchanger with high recovery efficiency, a very low consumption electronic commutation (brushless) motor, an automatic damper, an aesthetic cover to cover it from the inside and a conveyor from the outside.‎ Each unit is equipped with a remote control, a humidity and twilight sensor and a filter cleaning indicator.‎ It is possible to connect the product to the home automation network by serializing the power supply to allow programming of switching on and off.‎ Use Simple ventilation system that does not require ducting, therefore ideal for use in renovations and new homes where ducted systems cannot be built.‎ To be installed in single so-called “noble” environments, such as living rooms and bedrooms.‎ Optimal solution to ensure the removal of indoor pollutants and to prevent condensation and mold problems that inevitably damage the structure and compromise the health of the occupants.‎ If the thickness of the external wall exceeds 500 mm, it is possible to use the 700 mm extension, replacing the central tube that connects the external grille to the internal monocoque of the ventilation unit.‎