WAVIN ITALIA VENTIZA SOLO 60A-2

Decentralized Mechanical Controlled Ventilation unit with alternating double flow and high-efficiency heat recovery.‎ The SOLO A range consists of three different models: 60A, 30A-2, 60A-2.‎ The models are distinguished by different electronics and maximum air flow rate.‎ Models 30A-2 and 60A-2 are equipped with a remote control with capacitive keys and a display that facilitates use by the end-user.‎ Furthermore, it is possible to operate the units in night mode (fourth speed) to achieve maximum acoustic comfort, and it is possible to reset filters directly from the remote control.‎ All models can operate in extraction only or supply only mode.‎ In addition, it is possible to connect up to 16 units in Master/Slave mode, allowing the management of the entire system with a single remote control from the unit set as Master.‎ Models 60A and 60A-2 deliver a maximum flow rate of 60 m3/h (160 mm duct diameter).‎ All models are equipped with double separate filters for incoming and outgoing air, easily removable and washable, a high-efficiency ceramic heat exchanger, a very low consumption electronic commutation (brushless) motor, an automatic damper, an aesthetic cover for it on the inside and a conveyor on the outside.‎ Each unit is equipped with a remote control, humidity and twilight sensor, and filter cleaning indicator.‎ It is possible to connect the product to the home automation network by serializing the power supply to allow programming of switching on and off.‎ Use Simple ventilation system that does not require ducting, therefore ideal for use in renovations and new homes where ducted systems cannot be installed.‎ To be installed in single so-called "noble" rooms, such as living rooms and bedrooms.‎ Optimal solution to ensure the removal of indoor pollutants and to prevent condensation and mold problems that inevitably damage the structure and compromise the health of the occupants.‎ If the external wall thickness exceeds 500 mm, it is possible to use the 700 mm extension, replacing the central tube that connects the external grille to the internal monocoque of the ventilation unit.‎