UNIBAR F

Breathable, two-component, water-based epoxy finish with a satin appearance, suitable for painting concrete floors and plinths, even those subject to moisture and without a vapour barrier.‎ It creates a surface with good resistance to diluted acid, alkaline and salt solutions.‎ APPLICATION Multilayer use: Mix the two components and dilute with 5% clean water.‎ Add 30-35% by weight of 0.‎1-0.‎3 quartz and apply the first coat by a trowel.‎ Finish the following day with a coat of UNIBAR F diluted with 5% water, applied by a roller.‎  Varnishing use:  Mix the two components and dilute with 5% clean water.‎ Apply with a roller or brush.‎ Finish the next day with the second coat of UNIBAR F diluted with 5% water, applied with a roller or brush.‎  Finishing for other types of flooring:  UNIBAR F can be applied in one or two coats as a finish on multilayer and self-levelling cycles realized with UNIBAR T.‎  CONSUMPTION Consumption varies depending on the chosen cycle and the application method.‎  USEFUL ADVICES Ensure that the application surfaces are clean, free of friable parts, anti-adherent substances, and oils.‎ Perform thorough sandblasting, sanding, shot peening or milling.‎ The surface must have a tear resistance of at least 1.‎5 N/mm2.‎  To reduce surface soiling and increase the durability of the product, the application of the transparent topcoats WINMAT (matt) or WINGLOSS (gloss) is recommended.‎  COLOURS RAL colours.‎ STORAGE The product, in its undamaged packaging and stored in a cool and dry place, has a shelf -life of 12 months.‎ Protect from frost.‎ Store at temperatures between +5°C and +35°C.‎    Further info from manufacturer on UNIBAR F Winkler