UNIBAR T

Water-based, two-component, breathable epoxy formulation designed to create both self-levelling and multi-layer flooring on surfaces that are also subject to moisture and with no vapour barrier.‎ It creates a surface with good resistance to diluted acid, alkaline and salt solutions.‎ APPLICATION Multilayer use Mix the two components and add 25% by weight of quartz 0.‎1-0.‎ Apply a first coat by trowel, followed by a dusting of quartz 01-03.‎ After 24 hours remove excess quartz, sand the surface, and apply a  coat of product with a smooth trowel.‎ Multilayer use on tiled floors Place a 140-160 g/m2 glass fibre mesh on the substrate before proceeding with the multilayer cycle.‎ Self-levelling application After trowelling the surface, proceed with the application of WINFIX FISSATIVO.‎ Then mix component A+B and apply the product using a notched trowel.‎ Remove air bubbles with a bubble breaker roller.‎ Finish the cycles by roller application of two coats of UNIBAR F over the entire surface 24 hours after application of the last coat of UNIBAR T.‎ CONSUMPTION Consumption varies depending on the chosen cycle and the application method.‎ USEFUL ADVICES Ensure that the substrates are clean, free of friable parts, non-stick substances, and oils.‎ Perform thorough sandblasting, sanding, shot peening or milling.‎ The surface must have a tear resistance of at least 1.‎5 N/mm2.‎ COLOURS RAL colours.‎ STORAGE The product, in its undamaged packaging and stored in a cool and dry place, has a shelf -life of 12 months.‎ Protect from frost.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on UNIBAR T Winkler