W-BIT

W-BIT is a bituminous water-based paint.‎ Fast drying, solvent-free, it protects and waterproofs and is resistant to aging and weather.‎ This product, thanks to the high technical characteristic (high waterproofing and constant elasticity) is used as a thin coating for low thick protecting and waterproofing surfaces, walls, and concrete structures.‎ W-BIT can be used for the protection of various surface such as perimeter walls, concrete structures, prefabrications, tanks for non-drinking water and over both oxidizable and non-oxidizable metal.‎ APPLICATION The product is ready to use and must not be diluted with water or solvent.‎ It can be applied by roller, paintbrush, and airless spray.‎ Mix well before using to obtain a perfect homogenization.‎ On surfaces subject to chalking, we recommend a preventive application of the consolidating agent WINFIX CONCRETE.‎ CONSUMPTION 130 - 250 g/m² in one coat.‎ USEFUL ADVICES Carefully clean the surface to eliminate dust, crumbling parts, foreign or non-stick substances.‎ Only apply to dry surfaces and bases.‎ Check for the presence of hidden humidity to avoid flaking and bubbles, due to vapor pressure.‎ A practical method to check for underlying damp in the support to be treated could be to cover a square metre of the surface - better when exposed to the sun - with a polyethylene sheet of almost 2 tenths, fully sealing it at edges with double-bond tape.‎ After 24-48 check for any condensation beneath.‎ Apply at temperatures between +5°C and +35°C.‎ PACKAGING 5 - 10 - 18 kg pails.‎ STORAGE The product in its undamaged packaging can be stored for 12 months.‎ It can be stored also at low temperatures; however, we advise storing it at temperatures between +5°C and +35°C.‎ Further info from manufacturer on W-BIT Winkler