WINGRIP® NEXT

WINGRIP® NEXT is a ready-to-use adhesion promoter of extraordinary tenacity, based on resins in water dispersion and siliceous aggregates.‎ WINGRIP NEXT is an exceptional adhesion promoter that guarantees optimal adhesion on any cement, gypsum or lime-based mix, on various types of substrates: concrete, aerated concrete, gypsum, gypsum plasterboard, bricks, stone, bricks, ceramics, wood, insulating panels and even oxidisable metals.‎ WINGRIP®NEXT can be applied both indoors and outdoors.‎ The product is ready to use and very easy to apply.‎ It does not require prior wetting of the substrate and can be recoated after only two hours, but also after a few months after application.‎ APPLICATION WINGRIP®NEXT can be applied by brush, brush, roller or spray with an airless pump.‎ It is applied in a single coat, taking care to evenly cover the surface.‎ On particularly chalky surfaces, the preventive application of WINFIX CONCRETE consolidating agent is recommended.‎ CONSUMPTION 300 g/m2 in a single coat Fresh on fresh: 500 g/m2 USEFUL ADVICE Do not apply on surfaces subject to water stagnation.‎ Ensure application surfaces are clean, dry and free of crumbling parts, oils, grease, waxes and non-stick substances.‎ Apply at temperatures between 5° C and + 35° C.‎ For bonded screeds, including self-levelling screeds, it is recommended to overcoat when the product is fresh.‎ In all other cases wait (at least) two hours for complete drying.‎ For plastering, do not exceed 2 cm in thickness.‎   PACKAGING  5-10-20 kg buckets.‎ Colours: white-grey.‎ STORAGE In its unopened packaging and stored in a dry and protected place, it has a stability of 12 months.‎ Protects against frost.‎ Store at temperatures between +5°C and +35°C.‎