WINGUM PRO TECK RAPID - Жидкая водонепроницаемая мембрана

Bituminous waterproofing liquid membrane in water dispersion, thixotropic, quick drying.‎ Resistant to water stagnation and atmospheric agents, formulated with new generation raw materials that ensure UV resistance, even without protection, for up to 2 years.‎ Its rapid drying makes it rainproof after only a few hours, and if the weather conditions permit and if the surface areas are not particularly large, the product can be applied wet-on-wet, making possible to start and finish the work in a single day.‎ It can be applied to surfaces, even flat ones of concrete, fiber cement, wood, natural stone, and bricks, to waterproof flat roofs, foundations, gutter canals, and terraces.‎ It is particularly suitable for restoring deteriorated bituminous membranes, both smooth (oxidised at least 180 days after laying) and slated.‎ It can be used as a waterproofing layer before laying floating floors and, thanks to the corrosion inhibitor contained within it, is suitable for waterproofing metal surfaces, even oxidisable ones, without the need for specific primers.‎ Can also be used for localized emergency repairs on old bituminous membranes.‎ APPLICATION Can be applied by trowel, roller, brush or spray.‎   The system provides the application of BC SEAL BAND waterproof adhesive tape on the perimeter edges.‎ For pipes, drainpipes, aerators etc.‎ use BC SEAL PAD, waterproof self-adhesive square, in combination with BC SEAL BAND.‎ Joints up to 1 cm wide must be sealed with WINJOINT BAND (joint cover strip).‎ Joints wider than 1 cm must be sealed using a system consisting of with WINJOINT FOAM (compressible joint filler), WINJOINT SEAL (polyurethane sealant) and WINJOINT BAND.‎  CONSUMPTION 1 - 1.‎2 kg /m² in two or more coats, on vertical surfaces.‎   1.‎2 - 1.‎6 kg /m² in two or more coats, on horizontal surfaces.‎   1.‎6 - 1.‎8 kg /m² in two coats, with WINTECHNO MAT reinforcement fabric, inserted in-between.‎  USEFUL ADVICES Ensure that the application substrates are clean, dry, and free from crumbling parts.‎ On crumbling surfaces, we recommend applying WINFIX CONCRETE or WINGUM PRO TECK RAPID, previously diluted with 20% water.‎ For visible waterproofing, it is advisable to treat the product with the protective paints of the 2000 PLUS, 2000 PLUS REFLEX, ECOSILVERALL or COVERAME series.‎ Avoid contact with water until completely dry.‎ It is always advisable to check, before laying any waterproofing product, for the presence of hidden moisture (see TDS), to avoid flaking and surface bubbles, due to vapor pressure.‎  Apply at temperatures between +5°C and +35°C.‎  STORAGE The product, in its undamaged packaging and stored in a cool and dry place, has a shelf -life of 12 months.‎ Protect from frost.‎ Store at temperatures between +5°C and +35°C.‎  Further info from manufacturer on WINGUM PRO TECK RAPID Winkler