WINTAPLAST

WINTAPLAST iswo-component, waterproof, elastic, coloured mortar, resistant to UV rays and both positive and negative hydrostatic thrust.‎ Particularly suitable for applications on large surfaces, it can also be applied vertically.‎ The product has excellent adhesion to concrete, ceramic, natural and artificial stone, wood, steel, galvanized sheet metal and other non-oxidizable metals.‎ Waterproof, resistant to bad weather, frost, salts, chlorinated water, and abrasion, it can also be left exposed.‎ It is used for waterproofing and restoring concrete structures, even subject to severe stress, for waterproofing surfaces subjected to intense pedestrian traffic, or as a waterproof coating for swimming pools, fountains, tubs, and non-drinking water tanks.‎ APPLICATION Apply the product with a flat brush or a metal spatula.‎ CONSUMPTION 1.‎8 kg/m² per mm of thickness.‎ As a waterproof and abrasion resistant coating, in positive thrust: 3.‎6-4 kg/m², in two coats.‎ As waterproofing in negative thrust: 4.‎5-5 kg​/m², in three coats.‎ SURFACE PREPARATION The substrate must be clean, dry, cohesive, free oil crumbly parts, oils, or other non-stick substances.‎ Irregularities of up to 1.‎5 mm can be restored with WINTAPLAST.‎ Absorbent substrates such as concrete, plaster, masonry etc.‎ shall be dampened beforehand.‎ Prior to the application of WINTAPLAST it is highly recommended the use of BC SEAL BAND (self-adhesive butyl tape coated with polypropylene non-woven fabric) for proper reinforcement and sealing of corners and penetrations.‎ USEFUL ADVICES Apply on a clean, dry, cohesive surface, free of oils and non-stick substances.‎ Irregularities up to 1.‎5 mm, can be restored with WINTAPLAST.‎ Absorbent substrates (concrete, plaster, etc.‎) must be previously moistened.‎ For each single layer a thickness of 1 mm must not be exceeded.‎ The next layer can be applied when the previous one is perfectly dry.‎ Maximum total thickness of the coating: 3 mm.‎ For application in swimming pools, basins, tanks, fountains, and any structure intended for water containment, wait at least 7 days from the last coat of the product before filling.‎ PACKAGING Pack of 36 kg A + B (26 + 10 kg).‎ Pack of 18 kg A + B (13 + 5 kg).‎ COLOURS white - cream yellow (as per RAL 9001) - Grey (as per RAL 7032/7033/7040) - Blue (as per RAL 5012) STORAGE The product, in its undamaged packaging and stored in a dry and protected place, has a shelf-life of 12 months.‎ Store at temperatures between +5°C and +35°C.‎ Further info from manufacturer on WINTAPLAST Winkler