Capoferri Serramenti ATROPORTA Hinged honeycomb door with concealed hinges

Atroporta - For pocket-sliding doors, the frame consists of a ledge jamb, a header consisting of two profiles at the pocket entrance and one pair of telescopic intrados for adjustment to the wall thickness (up to 8 mm on each side).‎ The frame is supplied unassembled and can be fitted on a variety of pockets readily available on the market.‎ Fixing of ledge jamb by means of screws hidden under the intrados.‎ The header is fixed by means of partly hidden screws.‎ Brickmolding and intrados at the pocket entrance are to be fixed at intervals by means of glue (using a screw clamp).‎ Ledge molding dimensions: 20 x 120 mm.‎ Intrados molding dimensions: 12 x 90 mm.‎ Lacquered frames are entirely made from Tulipier.‎ Frames in timber come in Tulipier with a 20/10 timber veneer and solid timber.‎ Moldings and intrados consist of multilayer panels and a 6/10 timber veneer.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ The door blades (thickness 45 mm) consist of tambours panels and 6 mm MD support.‎ Plain lacquered door blades come with ledges made from Tulipier.‎ Plain door blades in solid timber come with a 6/10 veneer.‎ The ledge is made from solid timber.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ Finishes and qualities Lacquered doors and doors in solid timber come with an opaque water-based paint-finish.‎ Frame and door blade may have either the same or different finishes and timbers; Frames with a coplanar ledge always come in the same finish and/or the same timber as the door blade.‎ Atroporta, with its inclined axis, is different to common concepts where the blade is usually parallel to the wall: for this reason particular attention needs to be paid when jointing two different floorings under the door.‎