Capoferri Serramenti CASTA V Wood and glass door

Casta Vì - of one pair of iron profiles and one central wooden ledge (without moldings).‎ This frame is not telescopic.‎ It comes with fix dimensions of either 10.‎5 or 12 cm.‎ The door pocket, complete with aluminium track and pulley, is produced by Capoferri Serramenti.‎ The Casta door cannot be installed on door pockets produced by others.‎ The frame is supplied fully assembled complete with pocket, except for the ledge and spacers (if required) which are to be fitted on site during the installation of the door blade.‎ Jambs and header of the frame are invisibly welded on the corners.‎ One portion of the header is detachable to allow for the installation of the door blade.‎ The rubber-stop on the ledge comes in black.‎ For reasons of aesthetics neither gaskets nor brushes are fitted at the pocket entrance.‎ The frame is supplied fully assembled complete with door pocket.‎ The wooden parts of lacquered doors are made from Tulipier.‎ The wooden parts of the frame for doors in solid timber are either in solid timber or timber veneer.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ Glazed door blades are built without glazing stops, with stiles and rails in laminated fir, assembled “dowel-style”.‎ Glazed, lacquered door blades are made from laminated profiles veneered with 4 mm MD.‎ The ledge is made from Tulipier.‎ Glazed door blades in solid timber are made from laminated profiles and a 20/10 timber veneer.‎ The ledge is made from solid timber.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ Finishes and qualities  The frame always comes with a zinc-coating for final finish on site.‎ Lacquered doors and doors in solid timber come with an opaque water-based paint-finish.‎ Door blades can also be supplied with priming only (for final finish on site).‎