Capoferri Serramenti SESTA Pivot honeycomb door

Sesta - The frame for pivot doors is entirely made of metal.‎ It consists of one ledge and two telescopic intrados, which also function as brick-molding, allowing for adjustment to the wall thickness (up to 15 mm).‎ Hinges for pivot doors are produced in-house: the bottom pivot is the “piletta”, the top pivot is retracted.‎ Frame and intrados are supplied fully assembled, with invisible, welded joints on the corners.‎ Both frame and subframe a re installed by means of screws that are hidden under the intrados, The intrados in turn are fixed with a special gasket.‎ The door blades of the pivot door are placed in the centre.‎ Door blades with thickness 45 mm come in tambour panels and 6 mm MD support.‎ Plain, lacquered door blades come with a ledge made from Tulipier.‎ Plain door blades in solid timber come with a 6/10 timber veneer.‎ The ledge is made from solid timber.‎ The rubber-stop on the blade comes in black.‎ Finishes and qualities Lacquered doors and doors in solid timber come with an opaque water-based paint-finish.‎