Capoferri Serramenti PRIMA Honeycomb internal pocket sliding door

Prima - of a ledge jamb, a header consisting of two profiles at the pocket entrance and one pair of telescopic jambs for adjustment to the wall thickness (up to 8 mm on each side).‎ The frame is supplied unassembled and can be installed on pockets readily available on the market.‎ Fixing of ledge jamb by means of screws hidden under the intrados.‎ The header is fixed by means of partly hidden screws.‎ Brickmolding and intrados are fixed at intervals by means of glue (using a screw clamp).‎ Molding joints are secured by means of dovetail dowels.‎ The rubber-stop on the frame ledge comes in black.‎ For reasons of aesthetics neither gaskets nor brushes are fitted at the pocket entrance.‎ For doors sliding alongside the wall the frame is similar to the frame for hinged doors but differs on the side where the door is sliding: the ledge jamb protrudes and meets the L-shaped molding to conceal the tracks.‎ The telescopic intrados on the opposite side allows for adjustment to the wall thickness (up to 15 mm).‎ Molding dimensions: 15x85 mm.‎ Lacquered frames are made entirely from Tulipier.‎ The frame in solid timber comes in Tulipier with a 20/10 timber veneer and solid timber.‎ The moldings and intrados consist of multilayer panels and a 6/10 timber veneer.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ The door blades (thickness 45 mm) consist of tambour panels and 6 mm MD support.‎ Lacquered plain door blades come with ledges made from Tulipier.‎ Plain door blades in solid timber come with a 6/10 veneer.‎ The ledge is made from solid timber.‎ Doors in local walnut feature yesquero core and walnut veneer; all other doors come in solid timber.‎ Finishes and qualities Lacquered doors and doors in solid timber come with an opaque water-based paint-finish.‎ Frame and door blade are available both with matching or differing finishes.‎