POLIISO® FB - Панель теплоизоляционная из полиуретановой пены

POLIISO® FB is a yellow thermal insulation panel made of rigid, closed-cell PIR foam, expanded between two supports: the top one is made of glass veil added with mineral fibres and the bottom one of saturated mineralized glass veil.‎ The panels declares λD values from 0,025 W/mK to 0,028 W/mK (depending on thickness) according to European standard EN 13165, compressive strength values ≥ 150 kPa; Euroclass Bs1d0 according to the standard EN 13501-1.‎ The panels are available in thicknesses from 30 mm to 160 mm in a standard size of 600 x 1200 mm APPLICATIONS WITH POLIISO® FB: Insulation of walls (“ventilated facades”), Insulation of roofs POLIISO® are Polyiso foam (PIR) panels produced with ozone-friendly blowing agents and without the use of CFCs and HCFCs.‎ The foam is rigid, closed-cell, rot-proof and resistant to most chemical additives and high temperatures (up to 110 °C).‎ The panels, available with different surface finishes, are among the best thermal insulators on the market, declaring a thermal conductivity value of λD, up to 0.‎022 W/mK according to European standard EN 13165.‎ Some types of panels, being clad in aluminium, allow for total refraction of ultraviolet rays of sunlight on the roof, further increasing the thermal performance of the panels and, on the wall, they constitute an excellent vapour barrier.‎ POLIISO® is particularly suitable for thermal insulation in hot roofs, cavities, etc.‎ Further info from manufacturer on POLIISO® FB Ediltec