Laterlite

PaRis SPA is the fibre-reinforced radiant screed with a moist earth consistency and high conductivity, ideal for environments with a high presence of humidity such as spas, swimming pools, wellness centres and outdoor applications.‎ Thanks to its certified thermal conductivity of 1.‎71 W/mK and high mechanical resistance (30 N/mm² in compression, 6 N/mm² in flexion), it can be applied in thicknesses of 30 mm on radiant systems without the use of heat-plasticising additives.‎ Walkable in 24 hours, it is suitable for moisture-sensitive glued floors from 4 days and non-moisture-sensitive from 3 days.‎ ADVANTAGES Ideal for environments with high humidity Thanks to its specific formulation, Paris SPA is ideal for radiant screeds in all environments exposed to water and/or rising damp such as spas, swimming pools, wellness centres where it is not possible to use traditional radiant screeds.‎ Thermal conductivity The high thermal conductivity coefficient (λ equal to 1.‎71 W/mK certified) allows, in underfloor heating systems, better heat transmission with shorter set-up times and lower operating temperatures: all this translates into greater economy of the entire system.‎ Practical and safe The bagged packaging allows for a product with consistent performance in all conditions and shorter processing times than traditional sand/cement with normal application methods.‎ In addition, the flooring can be glued directly onto the surface once the substrate is dry.‎ Pumpable With normal pneumatic subfloor pumps.‎ Resistant The remarkable mechanical properties (30 N/mm² at compression) allow the laying of any type of surface finish.‎ Dry Applied 3 cm thick, it reaches residual moisture values of 2% by weight 4 days after laying, making it suitable for gluing any type of flooring.‎ Non-combustible Totally mineral-based and therefore with fire reaction "Euroclass A1fl".‎