Vortice ARIETT LL T HCS - Вытяжной вентилятор

- Plastic resin construction resistant to ageing caused by exposure to the sun ("UV resistant").‎ - Nominal diameter: 100 mm - Thermally protected motor, with shaft mounted on ball bearings.‎ - Maximum flow rate 70 m3/h - Equipped with an electronic board with a RH sensor (4 predefined threshold levels: 60%, 70%, 80%, 90%, selectable during installation), which determines the automatic switch-on of the fan.‎ The board incorporates an electronic timer to automatically switch the product off after the RH has returned below the preset threshold.‎ The duration of the timer can be set, during installation, in the range 3'-20' (default setting 3').‎ - Anti-return valve applied to the delivery outlet.‎ - IMQ and IMQ PERFORMANCE certified safety and performance - Speed controllable by Vortice regulator.‎ TECHNICAL DATA AND PERFORMANCE Max.‎ absorbed current (A) 0.‎14 Frequency (Hz) 50 Protection degree IP X4 Insulation class II° Ø Drain (mm) 100 Weight (Kg) 1,450 Max.‎ power consumption (W) 18 Voltage (V) 230 Max.‎ flow rate (l/s) 19,4 Max.‎ flow rate (m³/h) 70 Max.‎ pressure (mmH2O) 12 Max.‎ pressure (Pa) 118 Sound pressure Lp [dB (A)] 3m 40 RPM 2450 Suitable for wall and ceiling installation.‎ For intermittent extract of shower rooms, en suites, w.‎c's.‎ Suitable for ducting up to roof tile vents.‎ Contains integral backdraught shutter.‎ Two speeds.‎ IPX4 splash proof protection on all models.‎ The standard models can be speed regulated.‎ Timer models are adjustable from 3 to 20 minutes.‎ Long Life ball bearing motors which are guaranteed for 30,000 hours continuous, trouble free operation (LL models).‎ Available options of: timer, long life, humidistat and PIR models.‎ DUCT TO USE: Suitable for use with 100mm diameter ducting and flat ducting (FD100 - 110 X55).‎  Flexible aluminium and flexible insulated aluminium ducting available - see Accessories section.‎ GRILLES - different coloured grilles available, see below or Accessories section.‎