Vortice HRI-E ONE F

- Fire-resistant expanded polypropylene casing, galvanised steel end plates.‎ - 125 mm nominal diameter pipe connection ports.‎ - 2 brushless EC motors with shafts mounted on ball bearings; 3 speeds independently settable at installation and controllable via wired remote control panel with LCD display.‎ - Settable flow rate between 85 m3/h and 185 m3/h.‎ - High-efficiency counter-flow type heat exchanger made of plastic (PS).‎ - Automatically activated 100% filtered bypass.‎ - Automatically activated system to prevent ice formation on the heat exchanger.‎ - ModBus module with RS485 connection port in slave mode - Compatible with Vortice environmental sensors for temperature (C TEMP), relative humidity (C HCS) , presence (C PIR) and smoke (C SMOKE); slave operation of the sensors inhibits control from the control box: the unit operates at minimum speed as long as the reference parameters detected by the external sensors connected to it all remain below their respective threshold values; exceeding these determines the transition to the preset maximum speed, which is maintained until the original condition is restored.‎ - 2 F5 filters (alternatively, optional F7 filter on the delivery duct) - 2 metal brackets supplied TECHNICAL AND PERFORMANCE DATAFilter class F5 Max.‎ absorbed current (A) 0.‎55 Frequency (Hz) 50 Protection class IP X2 Insulation class I° Weight (Kg) 17.‎5 Max.‎ absorbed power (W) 71 Temp.‎ max.‎ room temp.‎ continuous operation (°C) 45 Min.‎ room temp.‎ continuous operation (°C) 0 Max.‎ inlet air temp.‎ (°C) 45 Voltage (V) 230 Max.‎ recovery efficiency (%) 94 Max.‎ flow rate (l/s) 52 Max.‎ flow rate (m³/h) 187 Sound power IN IN INLET Lw [dB(A)] 47 Sound power IN OUTLET Lw [dB(A)] 44 Sound power IN IRRADIATED Lw [dB(A)] 56 Max.‎ pressure (mmH2O) 237 Max.‎ pressure (Pa) 232 Sound pressure IN IN ASPIRATION Lp [dB(A)] 3m max.‎ vel 26 Sound pressure IN DELIVERY Lp [dB(A)] 3m max.‎ vel 23 Sound pressure IRRADIATED Lp [dB(A)] 3m max.‎ vel 35