YOKIS MTV500ER - Таймерный диммер

RADIO MTV500ER (cod.‎ 5454454) - 500W timed dimmer with neutral.‎ Technical features Mains voltage: 230V˜ (+10% - 15%) - 50Hz Power: No minimum power Max.‎ power: 300VA/500VA Max.‎ current: 1.‎3A / 2.‎2A sealed boxes: 1.‎3A /300VA other boxes: 2.‎2A/500VA Ambient temperature: -20°C + 40°C Relative humidity: 0 to 70% Functional characteristics Variation of brightness on sine wave, at start or end of phase, by automatic recognition of load type.‎ Inrush current limitation by means of filament pre-heating.‎ - Automatic self-exclusion in the event of short-circuit on load, with automatic reset after fault rectification.‎ - Electronic protection against overheating.‎ - Double thermal protection for power failure.‎ - Mains interference immunity up to 1.‎5kV - Range : in the same room < 100m² 50m in unobstructed field of view.‎ Range reduction in the presence of metal elements, through walls or bulkheads.‎ - Frequency : 2.‎4 GHz - Transmission : Bidirectional with notification led on transmitter.‎ Compatible loads - Normal incandescent bulbs - Halogen bulbs 230V - Energy-saving bulbs (1) - LED bulbs (2) - Dichroic bulbs 12V - Toroidal transformers - General electric motors - Aerators (1) The bulb must be dimmable (wording on the packaging) (2) Check that the LED bulb is dimmable.‎ With this type of light source, the possibility of brightness variation is not guaranteed, It is necessary to test for compatibility.‎ For best results, add the CHR3W accessory in parallel.‎ Useful accessories Transmitters Compatible with all YOKIS transmitters CHR3W: Resistive load for energy-saving bulbs and LEDs - UNIVERSAL: Works with the controls of any civil series.‎ - Compatible with dichroic lamps powered by ferromagnetic or electronic transformers.‎ - Also works on diverter circuits.‎ - ECONOMIC: Thanks to dimming, lamp consumption is reduced.‎ - COMFORTABLE: 'Soft start' and 'soft stop' for gradual switching on and off.‎ ADVANTAGES: - By holding down the button, the brightness can be varied from 3% to 100%, on loads from 5 to 500W.‎ - Double memory: - The last brightness level is memorised so that it can be recalled the first time it is pressed.‎ - The 100% brightness level is easily recalled with 2 short presses on the button.‎ - Built-in electronic protection in the event of a short circuit on the load with automatic reset after the fault has been eliminated.‎ - Increases the service life of bulbs and buttons thanks to the 'soft start' function.‎ - Also works with pushbuttons with indicator lights (max.‎ 20) by adding a single BV40 accessory.‎ - Switches off the light in case of forgetfulness.‎ - Has an adjustable timer function from 2 seconds to 4 hours.‎ - Provides a progressive switch-off warning when the timer expires.‎