BIOFINE - Шпаклевка

BIOFINE White, fibrous, lime-based bio-finish, to be applied indoors on MYKOLL It is the ideal solution for applying a sponged finish to complete the laying cycle of B/SANA (calcium silicate) anti-mould panels and B/ISOLA indoor insulation and B/TERMO outdoor insulation (after shaving reinforced with MYKOLL).‎ It is a paste product, based on air lime, selected aggregates, natural fibres and water.‎ It is highly transpiring, with high workability and resistance characteristics.‎ Indicative coverage: 2-3 kg/sq.‎m.‎ Fields of use: - perfect skimming on B/SANA, B/ISOLA and B/TERMO panels; - grouting (levelling) of areas with butt joints; - edge protection and grouting of butt joints; - smoothing, filling, finishing and coating of mineral substrates.‎ Properties: - high breathability and capillarity; - high alkalinity; - plastic, filling and covering; - 100% natural and environmentally friendly.‎ Bacchi s.‎p.‎a.‎ proposes a specific line of products for renovation and energy requalification interventions from the inside, which can improve the performance of the external envelope in an effective, quick and simple way but with great attention to health protection.‎ The three main factors that create most environmental and health problems are moisture, mould and heat loss.‎ Bacchi intervenes precisely on these factors with solutions that can be applied to the internal surface of pre-existing masonry, creating a sort of internal coat, with lime-based insulation, that reduces heat loss, without the use of vapour brakes, leaving the envelope breathable, dry and mould-free.‎ Internal insulation offers innumerable advantages, as it can be applied in any season and weather condition, does not require scaffolding, greatly reduces heat loss, improves thermal inertia in summer and allows the desired room temperature to be reached quickly.‎ The system includes: B/SANA, B/ISOLA: breathable mineral insulation panels.‎ They are applied to internal wall surfaces in a very simple manner, reducing heat loss and solving mould problems, while at the same time leaving the walls free to breathe and providing a pleasant, healthy indoor microclimate.‎  The line is completed by adhesives and skim coatings (MYKOLL and BIOFINE) and the anti-mould product (MUFFY SPRAY).‎